HC SERIES

Washer Extractor • 20, 30, 40, 60 Pound

Coin-operated hardmount washer extractor for self-service laundromats

Advanced Microcomputer
10 Preset Factory Programs, 30 programmable cycles
90G Extraction Force
3 Compartment Supply Dispensers On Top
Built-in Vacuum Breaker
4 Compartments & Flush For Central Liquid Chemical Supply
All Part in Contact with Solution Made of 304 (18/8) Stainless Steel
Stainless Steel Full Front Panel
Powder Coated (EG) Cabinet Side, Top and Rear Lower Panel
External Hot Water Supplied, Prepared for Direct Steam Connection
Single Rear Drain Connection
Single Motor Inverter Driven – Programmable Variable Speed
Robust Gamma A-Frame
3 Water Levels (L, M, H)
Coin Controller System with Coin Box and Coin Slot
Programmable Water Temperature

Request a quote Download PDF

Specifications

From the technical documents of the manufacturer, Image Laundry Systems. Figures are standard values and may change without notice. For details, call 02-249-0987.

HC SERIES — specifications from the manufacturer documents
Item	Unit	HC-20	HC-30	HC-40	HC-60
Maximum Capacity	kg. (lbs.)	9.07 (20)	13.61 (30)	18.14 (40)	27.22 (60)
Overall Dimensions
A - Machine Width	mm. (inch)	663 (26.1")	735 (28.9")	785 (30.9")	880 (34.6")
B - Machine Depth	mm. (inch)	830 (32.7")	949 (37.4")	1132 (44.6")	1182 (46.5")
C - Machine Height	mm. (inch)	1201 (47.3")	1284 (50.6")	1313 (51.7")	1530 (60.2")
Cylinder Information
Basket Diameter	mm. (inch)	(24")	610 (24")	680 (26.8")	790 (31.1")
Basket Depth	mm. (inch)	345 (13.5")	470 (18.5")	525 (20.7")	595 (23.4")
Basket Volume	cu.m (cu.ft)	0.11 (4)	0.14 (5)	0.19 (7)	0.29 (10)
Door Opening and Height
Door opening Diameter	mm. (inch)	365 (14.4")	365 (14.4")	365 (14.4")	450 (17.7")
Height of Door Bottom Above Floor	mm. (inch)	387 (15.2")	445 (17.5")	465 (18.3")	540 (21.3")
Drive Information
Number of Motors	Number	1	1	1	1
Size of Motor	kW (HP)	0.75 (1)	1.5 (2)	2.2 (3)	3.7 (5)
Cylinder Speeds
Wash	RPM (G-Force)	48.5 (0.8)	48.5 (0.8)	48 (0.8)	43 (0.8)
Distribution	RPM (G-Force)	76.5 (2)	77 (2)	70.2 (2)	67 (2)
Extract	RPM (G-Force)	570 (111)	527 (95)	498 (94)	583 (150)
Water Inlets and Consumption
Hot Water Size	NPT	3/4"	3/4"	3/4"	3/4"
Cold Water Size	NPT	3/4"	3/4"	3/4"	3/4"
Additional Water Inlet	NPT	3/4"	3/4"	3/4"	3/4"
Average HOT Water Consumption/Cycle	liters (gal)	91 (24)	91 (24)	193 (51)	223 (59)
Average COLD Water Consumption/Cycle	liters (gal)	174 (46)	174 (46)	102 (27)	106 (28)
Drain Outlets and Capacity
Number of Drains	Number	1	1	1	1
Drain Size	mm. (inch)	50.8 (2")	50.8 (2")	50.8 (2")	76.2 (3")
Drain Capacity	liters/min (gpm)	117 (31)	117 (31)	310 (81.9)	581 (153.5)
Steam Inlet and Consumption
Steam Inlet Connection	NPT	1/2"	1/2"	1/2"	1/2"
Steam Pressure	bar (Psi)	6 (100)	6 (100)	6 (100)	6 (100)
Steam Consumption	kg/hr (lb/hr)	11 (24.15)	11 (24.15)	23.5 (51.75)	34.4 (75.9)
Weight and Shipping Information
Net Weight (approx.)	kg. (lbs.)	240 (530)	286 (630.5)	437 (963.4)	499 (1100)
Domestic Shipping weight (approx.)	kg. (lbs.)	286 (630.5)	302 (665.8)	455 (1003)	519 (1144)

Standard features

Advanced microcomputer: 10 preset factory programs, 30 programmable cycles (WE03 coin controller)
90G extraction force
3 compartments supply dispensers on top
Built-in vacuum breaker
4 connections & flush for central liquid chemical supply
All part in contact with wash solution made of 304 (18/8) stainless steel
Stainless steel full front panel
Stainless steel top panel
Stainless steel basket
Powder coated (EG) cabinet side and rear lower Panels
External hot water supply, prepared for direct steam connection
Single rear drain connection
Single motor inverter driven – Programmable variable speed
Robust gamma A-frame
3 water levels (L, M, H)
Coin controller system
Programmable water temperature
Combination tank for Steam/Electric heated (Except: HC20)